Filter
Top Products
- 139 -
Saving/Disabling Configuration
The following describes the method of saving configuration after modification or disabling the
configuration files being enabled.
1. Save configuration subjected to modification.
Use the "cfgsave" command.
Using the "cfgsave" command allows modified configuration to be saved.
Format of "cfgsave" command
cfgsave <enter>
Executing the "cfgsave" command allows new information resulting from
modification at the execution to be saved.
If configurations are saved by this command, the configurations set after
system rebooting are enabled.
2. Disable configuration files being enabled.
Use the "cfgdisable" command.
Using the "cfgdisable" command allows enabled configuration files to be disabled.
Format of "cfgdisable" command
cfgdisable <enter>
Executing the "cfgdisable" command allows all zone configurations enabled
at the execution to be disabled.