Filter
Top Products
- 53 -
4-3. Setting FC Switch Module
To use the FC Switch Module, the following information must be set.
Password,
Network (required),
Port data rate (required),
Port topology (required),
Domain ID,
Checking / Setting Principal Selection Mode
Zoning (required), and
Time and time server
See "Appendix Device Setting Features" for how to use the features.
CAUTION
Notes on settings
If one or more setting items required for the FC Switch Module are set
incorrectly, a system fault may occur. Before executing a job, you should be
familiar with its feature and influence sufficiently.