Filter
Top Products
Page 3-16 NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
3.3 LINE Setting Command
SNET Setting Network Type (P x 64/56) 3-1
Note:
The command can only be issued when the VisuaLink is not in a call.
RNET Checking Network Type Setting (P x 64/56) 3-2
Description: Sets a network type (P x 64/56). Some networks use 8 kbps out of the 64
kbps for network control information, so the network available for users
may be limited to P x 56 kbps. When connecting to the network, check if
it is a limited network (P x 56) or clear network (P x 64).
Command Format: SNET p1
p1: Px64: Clear Network Type
Px56: Limited Network Type
Response: Normal Response: OK
Error Response: ERR01
ERR05
ERR07
ERR21
ERR45
ERR87
Description: Checks the current network setting (P x 64/56).
Command Format: RNET
Response: Normal Response: p1 OK
p1: Px64: Unlimited network
Px56: Limited network
Error Response: ERR01
ERR07
ERR87