Filter
Top Products
NDA-24233 Issue 2 Page 3-23
VisuaLink 128/384 Engineering Guide Console Command List
NDSR Checking My Number Registration 5-2
Description: Checks the current local dial number setting. In a communication, a local
dial number is reported to the remote site at a call origination. This is used
to check a local dial number set by a NDSS command.
Command Format: NDSR [p1]
p1: L11 : line 1 dial No. 1
L12 : line 1 dial No. 2
L21 : line 2 dial No. 1
L22 : line 2 dial No. 2
L31 : line 3 dial No. 1
L32 : line 3 dial No. 2
Response: Normal Response: p1 p2 OK
p1: L11 : line 1 dial No. 1
L12 : line 1 dial No. 2
L21 : line 2 dial No. 1
L22 : line 2 dial No. 2
L31 : line 3 dial No. 1
L32 : line 3 dial No. 2
p2: 0-9 : dial Number (within 20 digits)
: sub address (within 8 digits)
* : dial number/sub address separating code
No Entry : Registration Deleted
Local Dial Format: dial number * Sub Address
Error Response: ERR01
ERR05
ERR07
ERR41
ERR87
Note:
If p1 is omitted, the default is L11.