Filter
Top Products
Page 3-52 NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
3.19 ISDN Control Command
NCRN Requesting Connection 19-1
Description: Placing a BRI ISDN call. A call can be requested by either directly
specifying a remote number or using an speed dial number. If using an
speed dial number, it must be registered in advance with MDST command.
Command Format: NCRN p1 p2 p3
p1: #xx : speed dial call (xx : speed dial number)
0-9 : dial number (within 20-digit)
Sub address (within 8-digit)
* : address/ sub address
** : ch1/ ch2 separating code
R : redial
p2: B : 64 kbps
2B : 2x64 kbps
3B : 192 kbps
4B : 256 kbps
5B : 320 kbps
6B : 384 kbps
TEL : telephone
p3: 64 : P x 64 k network
56 : P x 56 k network
Note 1:
With p1: speed dial, p2 and p3 are omitted.
Note 2:
When p3: is omitted, “64” is set.
Note 3:
When p3 = TEL, p4 is omitted.
Response: Normal Response OK
Error Response: ERR01
ERR05
ERR33
ERR34
ERR35
ERR41
ERR43
ERR44
ERR45
ERR47
ERR48
ERR86
ERR87
Note:
If VL128, setting 3B - 6B in p1 results in error.