Filter
Top Products
Page 3-56 NDA-24233 Issue 2
Console Command List VisuaLink 128/384 Engineering Guide
3.21 Option Control Command
POCS Pointer Control 21-1
VCTS Talker Detection Control 21-2
Description:
Activates or deactivates the on-screen pointer . The pointer is displayed
at the remote monitor. This pointer can only be activated when both
systems (Remote/Local) are set to a NEC mode.
Command Format: POCS p1 p2 p3
p1: ON/OFF : control on/off
p2: 1-99 : X-axis
p3: 1-99 : Y-axis
Response: Normal Response: When Parameter is Omitted: p1 p2 p3 OK
p1: ON/OFF : control on/off
p2: 1-99 : X-axis
p3: 1-99 : Y-axis
When Parameter is Specified: OK
Error Response: ERR01
ERR36
Description: Activates or deactivates talker detection. When audio is detected the
camera will move to a selected preset (1-3). This command is valid only
with preset or auto mode camera.
Command Format: VCTS p1
p1: ON : speaker detection control ON
p2: OFF : speaker detection control OFF
Response: Normal Response: When Parameter is Omitted: p1OK
p1: ON/OFF : control ON/OFF
When Parameter is Specified: OK
Error Response: ERR01