Filter
Top Products
8
1. Introduction
Terminal Panel Features
1. COMPUTER 1 IN/Component Connector (Mini
D-Sub 15 Pin) (
→
page 13, 15)
AUDIO IN (Stereo Mini Jack) (
→
page 13, 14, 16)
2. COMPUTER 2 IN/Component (R/Cr, G/Y, B/Cb, H,
V) Connectors (BNC x 5) (
→
page 13)
AUDIO IN (Stereo Mini Jack) (
→
page 13)
3. COMPUTER 3 (DVI-D) IN Connector (24 Pin)
(HDCP compatible) (
→
page 14)
AUDIO IN (Stereo Mini Jack) (
→
page 14)
4. COMPONENT IN (Y, Cb/Pb, Cr/Pr) Connectors
(RCA) (
→
page 16)
AUDIO L/MONO, R (RCA) (
→
page 16)
5. S-VIDEO IN Connector (Mini DIN 4 Pin) (
→
page
17)
6. VIDEO IN Connector (RCA) (
→
page 17)
7.
VIDEO/S-VIDEO AUDIO L/MONO, R (RCA) (
→
page
17)
8. MONITOR OUT Connector (Mini D-Sub 15 Pin)
(
→
page 15)
9. AUDIO OUT (Stereo Mini Jack) (
→
page 15)
10.
PC CONTROL Port (D-Sub 9 Pin) (
→
page 137, 138)
Use this port to connect your PC or control system
to control your projector via a serial cable. This
enables you to control the projector using serial
communication protocol. A commercially available
RS232C cross cable is required to use this port. You
can also control the projector by using PC Control
Utility 3.0 contained on the supplied User Support-
ware 5 CD-ROM. To do so you must first have PC
Control Utility 3.0 installed on your PC. If you are
writing your own program, typical PC control codes
are on page 137.
11. Remote Jack (Stereo Mini Jack) (
→
page 11)
NOTE: Connecting the remote cable to the REMOTE mini
jack on the terminal panel will make the wireless operation
unavailable.
12. USB Port (Type A) (
→
page 36)
13. LAN Port (RJ-45) (
→
page 18, 99)
14. USB Wireless LAN unit (
→
page 139)
NOTE: A dummy cover is provided on this location of the
projector without the USB Wireless LAN Unit.
The actual appearance of the terminal panel may differ slightly from that shown in the drawing, but this does not af-
fect the projector’s performance.
WIRELESS
USB(LAN)
WIRELESS
14
7 8 1011
134 12 3 2
165 9