Filter
Top Products
Advanced
NetComm NB5 Ethernet/USB Modem Router YML717 Rev1
48 www.netcomm.com.au
CLIP [Classical IP over ATM] Connection Setup
The Classical IP over ATM (CLIP) support provides the ability to transmit IP packets over an ATM
network, CLIP support will encapsulate IP in an AAL5 packet data unit (PDU) frame using
RFC1577and utilizes an ATM-aware version of the ARP protocol.
To setup a CLIP connection, select WAN Setup >New Connection. From Type: select CLIP. This will
reveal the CLIP Connection Setup Screen.
Enter the Clip connection name: the name must be unique, must not contain spaces and must not
begin with a number [e.g. Bridge_1].
NAT Option: Network Address Translation is on by default [recommended].
Firewall [SPI]: Firewall is on by default [recommended].
Allow Incoming Ping: Unchecked by default [recommended]. Check only if this function is required
for testing purposes.
Select the encapsulation type (LLC or VC); if in doubt leave as default.
Select the VPI and VCI settings; 8/35 is Australian default [recommended].