NETGEAR RT314 Network Router User Manual


 
Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
Initial Configuration of the Router 4-5
If provided by your ISP, enter your PPTP IP Address and the Server IP Address of
their PPTP Server.
If provided by your ISP, enter the Connection ID/Name for your service. Otherwise
leave this field blank.
ProceedtoStep9.
d. If your service provider is RoadRunner AND you are required to run a RoadRunner login
program, leave Encapsulation as Ethernet and select Service Type as either RR-Manager
or RR-Toshiba. Enter these additional parameters:.
If your cable modem is Toshiba, select RR-Toshiba. Otherwise select RR-Manager.
Enter the user name and password provided by your ISP. These fields are case
sensitive.
If RoadRunner provided an authentication server address, enter it as Login Server IP
address. Otherwise, leave this field as 0.0.0.0.
Not all RoadRunner regions require a login program. If your region does not require a
login, leave Service Type as Standard.
9. ClickonNexttogotothefinalWizardscreenshowninFigure 4-5 below.
Figure 4-5. Browser-based Setup Wizard, third screen
This screen provides setup for the following parameters: