NETGEAR RT314 Network Router User Manual


 
Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
8-2 Using the Manager Interface to Configure the Router for Internet Access
Figure 8-1. Menu 4 - Internet Access Setup
2.
Enter the name of your ISP in the ISP’s Name field (for example, myISP).
This information is required for identification purposes only.
3. If your service provider does not require a login program, leave Encapsulation as Ethernet and
proceed to Step 8.
4. If your ISP uses PPP over Ethernet (PPPoE), use the space bar to toggle Encapsulation to
PPPoEand enter these additional parameters:
a. Enter your account’s login name as My Login.
b. Enter your account’s password as My Password.
c. If you wish to change the login timeout, enter a new value in seconds.
ProceedtoStep8.
5. (Europe) If your service provider uses Alcatel's ANT (ADSL Network Termination) with
PPTP as a login method, select Encapsulation as PPTP, and enter these additional parameters:
a. Enter your account’s login name as My Login.
b. Enter your account’s password as My Password.
c. If you wish to change the login timeout, enter a new value in seconds.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Login Server IP= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Single User Account= Yes
Press ENTER to Confirm or ESC to Cancel: