Filter
Top Products
Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
7-14 Using the Manager Interface for Initial Router Configuration
Figure 7-6. Menu 23 - System Password
2.
Enter your previous system password, and press [Enter].
3. Enter your new system password, and press [Enter].
4. Enter your new system password again for confirmation, and press [Enter].
You must enter this new password when you want to access the Manager through the serial port or
by a Telnet connection.
If you lose or forget the Manager password, you must clear the configuration of the router as
described in Chapter 11, “Troubleshooting.” Clearing the configuration causes the Manager
password to revert to the default, 1234.
Menu 23 - System Password
Old Password= ?
New Password= ?
Retype to confirm= ?
Enter here to CONFIRM or ESC to CANCEL: