Filter
Top Products
Reference Manual for the ADSL Modem Router DG834 v3
Virtual Private Networking (Advanced Feature) 6-27
v1.1, October 2006
b. Click on VPN Status (Figure 6-30) to get the Current VPN Tunnels (SAs) screen
(Figure 6-29). Click on Connect for the VPN tunnel you want to activate.
c. Look at the VPN Status/Log screen (Figure 6-28) to verify that the tunnel is connected.
VPN Tunnel Control
Activating a VPN Tunnel
There are three ways to activate a VPN tunnel:
• Use the VPN Status page.
• Activate the VPN tunnel by pinging the remote endpoint.
• Start using the VPN tunnel.
Figure 6-29
Note: Refer to “Using Auto Policy to Configure VPN Tunnels” on page 6-36 to enable
the IKE keepalive capability on an existing VPN tunnel.