NETGEAR DG834 v3 Network Router User Manual


 
Reference Manual for the ADSL Modem Router DG834 v3
Protecting Your Network 3-15
v1.1, October 2006
How to Schedule Firewall Services
If you enabled services blocking in the Block Services menu or Port forwarding in the Ports menu,
you can set up a schedule for when blocking occurs or when access is not restricted.
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
User Name of admin, default password of password, or using whatever Password and LAN
address you have chosen for the modem router.
2. Select the Schedule link of the Security menu to display menu shown above in Figure 3-11.
3. To block Internet services based on a schedule, select Every Day or select one or more days. If
you want to limit access completely for the selected days, select All Day. Otherwise, to limit
access during certain times for the selected days, enter Start Blocking and End Blocking times.
4. Enter the values in 24-hour time format. For example, 10:30 am would be 10 hours and 30
minutes and 10:30 pm would be 22 hours and 30 minutes. If you set the start time after the end
time, the schedule will be effective through midnight the next day.
5. Click Apply to save your changes.
Trend Micro Home Network Security
You can enable Home Network Security as described in this section if you did not do so when you
originally set up your router. Home routers provide an enhanced Internet experience, but the
likelihood of attacks also increases. Trend Micro Home Network Security addresses the security
needs of computers accessing the Internet via home routers.
To begin using Home Network Security, configure the Security Service and Parental Controls
menus on your DG834 ADSL Modem Router. Each screen has a GUI button to click that will take
you to the Trend Micro Web site to open your Trend Micro account.
Note: The DG834 ADSL Modem Router supports Home Network Security. To take
advantage of this feature you must register an account with Trend Micro. For
more information, refer to the Home Network Security Quick Start Guide on the
NETGEAR Resource CD, or to http://www.trendmicro.com/offers/netgear. The
Trend Micro software requires Microsoft Internet Explorer 5.5 or higher.
Note: Because of overlapping functionality, the Block Sites feature, described in “How to
Block Keywords and Sites” on page 3-3, is disabled if you enable Trend Micro
Home Security.