NETGEAR DG834 v3 Network Router User Manual


 
Reference Manual for the ADSL Modem Router DG834 v3
B-12 NETGEAR VPN Configuration
v1.1, October 2006
c. Click Show Status. The resulting screen should show Update OK: good (see
Figure B-10).
5. Configure the DG834 v3 as in the Gateway-to-Gateway procedures using the VPN Wizard
(see “How to Set Up a Gateway-to-Gateway VPN Configuration” on page 6-20), being certain
to use appropriate network addresses for the environment.
The LAN Addresses used in this example are as follows:
a. In Step 1, enter toFVL328 for the Connection Name.
b. In Step 2, enter fvl328.dyndns.org for the remote WAN's IP address.
a. In Step 3, enter the following:
IP Address = 172.23.9.1
Subnet Mask = 255.255.255.0
6. Configure the FVL328 as in the Gateway-to-Gateway procedures for the VPN Wizard (see
“How to Set Up a Gateway-to-Gateway VPN Configuration” on page 6-20), being certain to
use appropriate network addresses for the environment.
Figure B-10
Device LAN IP Address LAN Subnet Address
DG834 v3 10.5.6.1 255.255.255.0
FVL328 172.23.9.1 255.255.255.0