Filter
Top Products
GS700TP Smart Switch Software Administration Manual
6-2 Managing Security
v1.0, December 2007
Change Password
The Change Password screen contains parameters for configuring device passwords.
Authentication on this device uses only a password, not a username.
To change the device password:
1. Click Security > Management Security > User Configuration > Change Password. The
Change Password screen displays:
The Change Password screen contains the following fields:
• User Name – Displays the User Name.
• Old Password – Enter the current password for accessing the system.
• New Password – Enter a new password for accessing the system.
• Retype New Password – Repeat the new password used to access the system.
2. Enter the Old Password, New Password and Retype New Password in the provided fields.
3. Click Apply to update the device.
RADIUS
Remote Authorization Dial-In User Service (RADIUS) servers provide additional security for
networks. RADIUS servers provide a centralized authentication method for web access.
The default parameters are user-defined, and are applied to newly defined RADIUS servers. If new
default parameters are not defined, the system default values are applied to newly defined
RADIUS servers.
Figure 6-1