NETGEAR GS700TP Switch User Manual


 
GS700TP Smart Switch Software Administration Manual
8-8 Maintenance
v1.0, December 2007
Short Cable – A short has occurred in the cable.
OK – The cable passed the test.
Cable Fault Distance – Displays the distance from the port where the cable error
occurred.
Last Update Displays the last time the port was tested.
Test – The test results are displayed.
Cable Length – Displays the approximate cable length. This test can only be performed
when the port is up and operating at 100Mbps or 1 Gbps.
2. On the row containing the interface to be tested, click TEST to test the cable connected to the
interface.