Filter
Top Products
GS700TP Smart Switch Software Administration Manual
6-6 Managing Security
v1.0, December 2007
2. Select the TACACS+ server entry.
3. Enter the Host IP Address, Key String, Authentication Port and Timeout for Reply in the
provided fields in the first row.
4. Select the Single Connection status and Active server from the lists in the provided fields in
the first row.
5. Click Apply to update the device.
To add a new TACACS+ server entry:
1. Click Security > Management Security > TACACS+. The TACACS+ screen displays.
2. Enter the Host IP Address, Key String, Authentication Port and Timeout for Reply in the
provided fields in the first row.
3. Select the Single Connection status and Active server from the lists in the provided fields in
the first row.
4. Click Add to update the device.
To remove a TACACS+ server entry:
1. Click Security > Management Security > TACACS+. The TACACS+ screen displays.
2. Select the TACACS+ server entry.
3. Click Delete to remove the entry.
Authentication List
The Authentication List screen contains information for defining an authentication method for the
selected Authentication List. For example, if the user selects TACACS+ as the first entry, None as
the second, this causes authentication to first occur at the TACACS+ server. If the TACACS+
server is inaccessible or not defined, the session is permitted.
Once the Authentication List is defined as Local, it is not possible to define an alternative
authentication method as it is a built-in system authentication method.
In order to configure RADIUS/TACACS+ authentication, the user name should be configured as
$enab15$ on the RADIUS/TACACS+ server.