Filter
Top Products
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual
1-11
v1.0, December 2007
If you right-click the system tray icon, you can disable the Internet notification feature by clearing
the check mark enabling notification, as shown in
the following figure. If you do so, then only the
IP address is shown.
In Vista, there is one more option: Enable NETGEAR Smart Wizard.
If you clear the check mark for Enable NETGEAR Smart Wizard, the NETGEAR Smart Wizard
will be disabled and you will need to setup the wireless adapter with Vista Auto configuration.
WN111 LED
The LED on the WN111 indicates the condition of wireless link
Placing the USB Adapter Cradle
You can attach the RangeMax Next WN111 Wireless USB 2.0 Adapter directly to a USB port on
your computer, or use the USB cable to extend the range and obtain better wireless reception.
Follow these instructions to use the USB cable, plastic cradle, and loop and hook fastener provided
in the package for better USB Adapter placement on a notebook computer:
1. The RangeMax Next WN111 Wireless USB 2.0 Adapter comes with three black fasteners.
Locate the one with a prickly side and attach it to the plastic cradle on the middle of the
outside rear.
Figure 1-10
Figure 1-11
LED Meaning
Off • The WN111 in not plugged in to the PC.
• Power save mode (default from power up
or reset).
Blink Looking for network association.
On Associated or joined with network.