Filter
Top Products
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual
2-13
v1.0, December 2007
1. Use the icon to open the Smart Wizard. The Settings screen displays.
2. Enter the network settings.
a. In the Network Type section, make sure that Access Point (Infrastructure) is selected.
b. In the Profile box, type the name of the profile.
c. In the Network Name (SSID) field, select a network or enter the SSID.
3. Save your settings in a Profile.
a. Click Save Profile.
All the configuration settings are saved in this profile.
b. Click Apply and then click Close to exit, or Cancel to return to the previous settings.
4. Verify wireless connectivity to your network.
Figure 2-16
Note: You will not get a wireless network connection unless the network SSID
matches exactly the SSID used by the access point.