Filter
Top Products
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual
2-21
v1.0, December 2007
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c. In the Security section, select WPA-PSK [TKIP] and enter the passphrase. For more
information about WPA-PSK, see the link to “Wireless Communications:” in Appendix B.
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply and then click Close to exit the Smart Wizard.
Setting up WPA2-PSK Security
Follow these steps to configure WPA2-PSK Security:
1. Run the WN111 Smart Wizard.
a. Make sure the WN111 software is installed and the WN111 is fully inserted in a USB port
in your computer.
b. Use the icon to open the Smart Wizard. The Settings screen displays:
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
Figure 2-23