Filter
Top Products
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual
2-14
v1.0, December 2007
Use a browser to connect to the Internet, or check for file and printer access on your
network.You can check the status bar in the Smart Wizard for the current connection status.
Setting up a Computer-to-Computer (Ad Hoc) Profile
The Computer-to-Computer setting uses Ad Hoc mode. Ad Hoc mode is an 802.11 networking
framework in which devices or computers communicate directly with each other, without the use
of an access point. For example, this mode is used when two Windows computers are configured
with file and print sharing enabled and you want to exchange files directly between them.
To create an Ad Hoc mode profile:
1. Use the icon to open the Smart Wizard. The Settings screen displays:
Note: If you cannot connect, see Chapter 4, “Troubleshooting”. For problems with
accessing network resources, the Windows Client and File and Print Sharing
software might not be installed and configured properly on your computers.See the
link to “Internet Networking and TCP/IP Addressing:” in Appendix B.
Note: Ad Hoc mode will not work using DHCP settings. Ad Hoc mode requires either
static IP addresses (such as
192.168.0.1) or the IPX protocol. For help setting up
static IP addresses, see the PC Networking Tutorial on the Resource CD.
Figure 2-17