Filter
Top Products
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual
2-16
v1.0, December 2007
At this point the connection is established.
Starting a Computer-to-Computer (Ad Hoc) Network Connection
1. On the Settings tab page of the Smart Wizard, select or type the Network Name (SSID).
2. Select the Computer-to-Computer (Ad Hoc) network type.
3. Click Initiate Ad Hoc. The Ad Hoc Setting dialog box opens:
4. In the Start Ad Hoc field, choose the wireless standard (802.11b or 802.11g) for your Ad Hoc
computer-to-computer network.
5. In the Channel field, Automatic should work. If you notice interference problems with another
nearby wireless device, select a channel that is not being used by any other wireless networks
near your wireless adapter. Use the Networks tab to view the channels in use in your area.
6. Click OK.
Note: If you cannot connect, see “Removing the WN111 Software” in Chapter 1. For
problems accessing network resources, the Windows Client and File and Print
Sharing software might not be installed or configured properly on your computers.
See the link to “Internet Networking and TCP/IP Addressing:” in Appendix B.
Figure 2-20
Note: The channel number differs depending on the country. The connection speed
automatically defaults to the highest speed.