Filter
Top Products
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual
2-3
v1.0, December 2007
2. Click the Networks tab. The Networks screen displays:
The buttons located at the bottom of the Networks tab are:
• Help. Displays utility help contents.
• Join a Network. View networks and join a network. See “Joining a Network” on page 2-4.
• Connect. Connect to the network that you selected.
• Scan. Check for wireless networks. Clicking Scan refreshes the page.
• Close. Close the window of the Wizard.
The screen shows the following information for each network scanned:
• Network Name (SSID). The name assigned to a wireless network. This is the same as the
SSID or ESSID configuration parameter. Note that as a security measure, some wireless
access points do not broadcast their SSID. In such cases, the SSID field will be blank even
though the rest of the information will still be displayed.
• Channel. The channel determines which operating frequency will be used.
• N. The access point supports wireless N mode.
• WPS. The access point supports WPS.
• Security. Identifies whether the wireless network uses security settings such as WEP,
WPA2-PSK, or WPA-PSK.
• Signal. Identifies the signal strength of the communications.
Figure 2-2
You can click a column
heading to sort.
If many networks use
the same channel they
can interfere with each
other.
The Status bar shows
your network connection
and Internet connection.