Filter
Top Products
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
2-4 Installation and Configuration
v1.0, September 2008
• Click Logout to exit the WN802T v2. (You will automatically be logged out of the
wireless access point after 5 minutes of no activity.)
To set the Access Point Name and Country/Region:
1. On logging in, the General settings screen under Configuration > System > Basic displays..
2. Enter the Access Point Name of the WN802T v2.
The access point name is printed on the back label of the WN802T v2. The default is
netgearxxxxxx, where xxxxxx represents the last 6 digits of the WN802T v2 MAC address.
You may modify the default name with a unique name up to 15 characters long.
3. Select the country/region where the WN802T v2 can be used.
4. Click Apply to save your settings.
Figure 2-2 Access Point name and Country/Region
Note: If your country or region is not listed, please check with your local government
agency.