NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Installation and Configuration 2-5
v1.0, September 2008
To select the local time zone:
1. Select Configuration > System > Basic > Time. The Time Settings screen displays.
2. Configure the following information:
– Time Zone. From the pull-down menu, select the local time zone for your wireless access
point from a list of all available time zones. The default is Pacific Time (US-Canada).
– Daylight Saving. This option is always disabled. The default is no adjustment.
– Current Time. The AP gets the current time from its system clock, or an NTP server if
this is enabled.
– NTP Client. Enable NTP Client to synchronize the time of the access point with an NTP
Server. The default is Enabled.
– Use Custom NTP Server. Check the option if you have a custom NTP server. The default
is Disabled.
– Hostname/IP Address. Enter the host name or the IP address of the custom NTP server.
The default is time-b.netgear.com
Figure 2-3 Local time zone settings
Note: You must have an Internet connection to get the current time from an NTP
server.