Filter
Top Products
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Wireless Security Settings 3-11
v1.0, September 2008
Configuring WPA and WPA2 with RADIUS
Not all wireless adapters support WPA and WPA2. Client software is required on the client:
• Vista, Windows XP and Windows2000 with Service Pack 3 or later, do include the client
software that supports WPA/WPA2. The wireless adapter hardware and driver must also
support WPA/WPA2.
• Service Pack 3 does not include the client soft ware that supports WPA2. Make sure your
client card supports WPA2. The wireless adapter hardware and driver must also support
WPA2.
Consult the product documentation for your wireless adapter; WPA client software for instructions
on configuring WPA settings; and WPA2 client software for instructions on configuring WPA2
settings.
To configure WPA and WPA2 with RADIUS:
1. Under the Configuration tab, select Security on the main menu, select Advanced from the
side menu, and then select RADIUS Server Settings. The RADIUS Server Settings screen
displays.
2. Enter the RADIUS server settings as shown in “Configuring the RADIUS Server Settings” on
page 4-13.
3. Click Apply to save your RADIUS server settings.
Figure 3-5 WPA and WPA2 with RADIUS security settings