Filter
Top Products
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
3-10 Wireless Security Settings
v1.0, September 2008
Configuring WPA2 with RADIUS
Not all wireless adapters support WPA2. Furthermore, client software is required on the client.
Make sure your client card supports WPA2. Consult the product document for your wireless
adapter and WPA2 client software for instructions on configuring WPA2 settings.
To configure WPA2 with RADIUS:
1. Under the Configuration tab, select Security on the main menu, select Advanced from the
side menu, and then select RADIUS Server Settings. The RADIUS Server Settings screen
displays.
2. Enter the RADIUS settings as shown in “Configuring the RADIUS Server Settings” on
page 4-13.
3. Click Apply to save your RADIUS settings.
4. Under the Configuration tab, select Security from the main menu, and select Security
Settings from the side menu. From the Network Authentication drop-down menu, select
WPA2 with RADIUS from the list. By default, Data Encryption will be set to AES.
5. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations).
6. Click Apply to save your settings.
Figure 3-4 WPA2 with RADIUS security settings