Filter
Top Products
NTI VEEMUX VIDEO MATRIX SWITCH
15
Video Switch Page
The Video Switch page (right) displays the
active connections (shown in orange) and
enables the user to control the video
connections of the VEEMUX. Up to 100
different connection configurations can be
saved and later recalled by any connection
method.
Note: If changes are made using the
keypad (pg.7) or by another user through
the web interface, you must refresh the
screen using your browser to see those
changes.
Note: Configuration 0 will be
automatically loaded when the VEEMUX
is powered up.
To change a connection
, click on the radio
button (square image with circle in the
center) that intersects the input and output
columns. A black dot will be placed in the
circle to indicate the selection. Then press
the Submit button. The display will be
reloaded with the selections changed to
orange to indicate they are now active.
Multiple connections can be changed
simultaneously.
Figure 9- Web interface Switch page
To quickly clear the selected radio buttons press the Clear Changes button. This will only work if the Submit
button has not already been pressed with the selections made.
To quickly connect all outputs to a single input
, choose the desired input from the "Set all Outputs to Input" drop-
down list and press the Submit button.
Note: If radio buttons are selected in addition to using the "Set all Outputs to Input" option, the selections
made by the "Set all Outputs to Input" will take precedence when the Submit button is pressed. Selections
that conflict with it will be ignored.