Filter
Top Products
NTI VEEMUX VIDEO MATRIX SWITCH
4
INSTALLATION
Connect the Sources and Monitors
1. Turn OFF power to all video sources (inputs) that will be connected to the VEEMUX before connecting or
disconnecting any cables.
2. Connect a VEXT-xx-MM cable from the video port of a video source to a 15HD female video connector
labeled VIDEO 1 on the VEEMUX. (See Fig. 1)
3. Connect additional video sources to remaining 15HD female VIDEO x connectors as desired.
Figure 1- Install Video Source Cables
4. Connect a monitor to the 15HD female connector labeled MONITOR 1 on the rear of the VEEMUX (See Fig. 2).
5. Connect additional monitors to remaining 15HD female MONITOR x connectors as desired.
Figure 2- Connect a monitor to the VEEMUX
HD15-Male
HD15-Male
Rear View of SM-8X8-15V-LCD
7 8 5 6 3 4
1 2
8 5 6 3 4 1 2
VIDEO VIDEO MONITOR MONITOR
7
R
S
2
3
2
VEXT-xx-MM
Rear View of
Video Source
CPU)
15HD male
Video Connector
15HD female
Video Connector
15HD female
Video Connector
NTI
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www. nti1.com
R
VGA
Multi-Scan
Monitor
Rear View of SM-8X8-15V-LCD
7 8 5 6 3 4
1 2
8 5 6 3 4 1 2
VIDEO VIDEO MONITOR MONITOR
7
R
S
2
3
2
NTI
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.nti1.com
R
15HD female
Video Connector
15HD male
Video Connector