Filter
Top Products
2322
PREPARATION
Set Date and Time (F65D only)
4
This camera allows you to imprint Year/Month/Day, Day/Hour/Minute (24-
hour clock), Month/Day/Year or Day/Month/Year on your picture in any
exposure mode. (For imprinting date/time, see page 39.)
1
Push MODE button to select one of the
date or time displays. Push SELECT
button so section to be corrected starts
blinking.
•Date cannot be set in Day/Hour/Minute display. To
set date, select Year/Month/Day, Month/Day/Year or
Day/Month/Year.
•Set the time in Day/Hour/Minute display.
• Adjusting date and time (Example: year 2001, January 15)
2
Push ADJUST button to change the
blinking numbers and after correction,
push SELECT button until the numbers
stop blinking.
• Each time you push the ADJUST button, year section
moves up from 98 to 49 (back to 98 after 49).
•To change the numerical indication rapidly, hold the
ADJUST button down for more than 1 sec.
•Push SELECT button until the date/time display
stops blinking. When the imprint indicator
—
appears in the data imprint LCD panel, the setting
is complete.
NOTE: Battery requirements for imprinting
Imprinting of date/time requires one CR2025 3V lithium battery separate from the
batteries required for the camera body. Battery life is approx. 3 years. When the
imprinting on the photo appears faded and/or the display of the data imprint on
the LCD becomes faint or disappears, this indicates low battery power. Replace
the battery (making sure to set correct date/time after changing battery).
1
Open camera back, remove the battery
chamber cover for imprinting and then
remove the used battery.
•Use a pointed object to remove the battery.
• Changing battery for imprinting
2
Insert a new CR2025 3V lithium battery
with ´ side facing up. Attach the battery
chamber cover.
NOTE: Storing batteries
Keep the batteries out of children’s reach. If swallowed, contact a doctor
immediately. (For “Notes on Batteries”, see page 98.)
F65 (E) 02.12.27 5:43 PM Page 22