Filter
Top Products
4-12 Network Interface
Scanner auto reset
The scanner settings are initially set to return to their default condition auto-
matically after the machine has been idle for 3 minutes. You can, however,
change this time from 1 to 10 minutes. Also, you can program the settings to
return to their default condition as soon as the scanning has been completed.
1
Press [Menu], [2], [4], [2], then [Enter].
Auto Reset Time
(01-10)
03 min.
2
Use the numeric keys to enter the auto reset time. Then, press [Enter].
Enter a leading zero when entering a quantity less than 10. (Ex. 01.)
3
The machine will ask you whether the machine should reset to the
default settings after the scan job has been completed.
Reset After Scan:Off
/
/Enter
4
Use [ ] or [ ] to select the setting.
5
Press [Enter] to save the setting.
To finish, press [Reset].
4.5.1 Printing a list of scanner settings
To print a list of your scanner settings, press [Menu], [5], [1], [1], [9], [Enter].