Filter
Top Products
5-8 Network Interface
5.5 Registering an e-mail address
You can register a recipient’s e-mail address into the one-touch keys or speed-
dial numbers. When communications are frequent with a certain recipient,
this setting can save cumbersome entry jobs.
5.5.1 One-touch key registration
To register an e-mail address into a one-touch key:
1
Press [Menu], [1], [1], [1], then [Enter].
Select One-Touch
01:No Number Stored
2
Select a one-touch number, then press [Enter].
Fax Number
/
/Enter
3
Select “Mail Address”.
Mail Address
/
/Enter
4
Press [Enter].
01:Address ;Lower
_
5
Enter an e-mail address using the numeric keys. (Up to 50 characters).
Then press [Enter].
01:Name ;Upper
_
6
Enter the destination name using the numeric keys (up to 24 characters).
Then press [Enter].
7
To enter another one-touch key, repeat this procedure from step 2.
To return to standby, press [Reset].
NOTE:
Refer to “Entering characters” on
page
7-2, if necessary.
To erase a one-touch key:
1
Press [Menu], [1], [1], [2], then [Enter].
2
Select the one-touch key that you want to erase.
3
Press [Enter] twice.
4
To erase another one-touch key, repeat this procedure from step 2.
To return to standby, press [Reset].