Filter
Top Products
5-9Network Interface
5.5.2 Speed-dial number registration
1
Press [Menu], [1], [2], [1], then [Enter].
Enter Speed-Dial No.
001:No Number Stored
2
Select a speed-dial number, then press [Enter].
Fax Number
/
/Enter
3
Select “Mail Address”.
Mail Address
/
/Enter
4
Press [Enter].
01:Address ;Lower
_
5
Enter an e-mail address using the numeric keys. (Up to 50 characters).
Then press [Enter].
01:Name ;Upper
_
6
Enter the destination name using the numeric keys (up to 24 characters).
Then press [Enter].
7
To enter another speed-dial number, repeat this procedure from step 2.
To return to standby, press [Reset].
NOTE:
Refer to “Entering characters” on
page
7-2, if necessary.
To erase a speed-dial number:
1
Press [Menu], [1], [2], [2], then [Enter].
2
Press [ ] or [ ] to select a speed-dial number.
You can also select a speed-dial number by directly entering that three-
digit identifier code.
3
Press [Enter] twice.
If you want to quit without erasing, press [Cancel].
4
To erase another speed-dial number, repeat this procedure from step 2.
To return to standby, press [Reset].