Nikon P7100 Webcam User Manual


 
E6
A, B, C, D Modes
Reference Section
B Notes on Shooting
When zooming is performed after the exposure is set, exposure combinations or aperture value
may be changed.
When the subject is too dark or too bright, it may not be possible to obtain the appropriate
exposure. In such cases, the shutter speed indicator or aperture value indicator blinks when the
shutter-release button is pressed halfway. Change the shutter speed setting or aperture value.
When settings such as Built-in ND filter (E85) or ISO sensitivity (E30) are changed, the
appropriate exposure may be obtained.
At shutter speeds of 1/4 second or slower, noise may appear in the image. In such situations, the
shutter speed indicator lights in red. Setting Long exposure NR (E53) to On is recommended.
C Shutter Speed
The control range of the shutter speed differs depending on the ISO sensitivity setting.
Additionally, the range is restricted during continuous shooting (A83).
When the zoom is on the wide-angle position and the aperture value is set to f/8 (minimum
aperture), the shutter speed can be set to up to 1/4000 seconds.
C More Information
See “Customize Command Dials” (E86) for more information.