Filter
Top Products
F8
Troubleshooting
Technical Notes and Index
b Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear on the monitor and the
camera may stop functioning. In most cases, this phenomenon is caused by a
strong external static charge. Turn the camera off, remove and replace the battery,
then turn the camera on again. Note that disconnecting the power source as
described above may result in the loss of any data not recorded on the internal
memory or memory card at the time the problem occurred. Data already recorded
is not affected. In the event of continued malfunction, contact your retailer or
Nikon-authorized service representative.
Print date not
available.
Time zone and date has not been set. 26, 104
Date not
appearing on
pictures even
when Print date is
enabled.
• A shooting mode that does not support print date is
selected.
• Another function that is set now is restricting the print
date.
• The date cannot be imprinted onto a movie.
104
80
–
Camera settings
reset.
Clock battery is exhausted; all settings were restored to their
default values.
27
Reset file
numbering
cannot be done.
• Reset file numbering cannot be applied when the
folder number reaches 999 and there are images in the
folder. Change the memory card, or format the internal
memory/memory card.
• Reset file numbering cannot be set when the scene
mode is set to Panorama assist, or when the shooting
mode is A, B, C, D, E, F or N and Intvl timer
shooting is chosen for Continuous in the shooting
menu.
104,
E83
45
Monitor is turned
off, and the power-
on lamp flickers.
Battery temperature is high. Turn off camera, and allow
battery to cool down before resuming use. After the lamp
blinks for three minutes, the camera turns off automatically,
but you can also press the power switch to turn it off
manually.
25
Camera
temperature rises.
When functions such as movie recording or sending images
using an Eye-Fi card are used for a long time, or when the
camera is used in a location with a high ambient
temperature, the camera temperature may rise. This is not a
malfunction.
99
Problem Cause/Solution A