Filter
Top Products
65
Features That Can Be Set Using the Multi Selector
Shooting Features
Smile Timer (Shooting Smiling Faces)
When this mode is selected, the camera detects smiling faces and automatically
releases the shutter even if you don’t press the shutter-release button.
• This function can be used when the shooting mode is A (auto), A, B, C, D,
E, F, N, O (low noise night), scene mode Portrait or Night portrait.
1 Press J (n self-timer) on the multi selector.
• Change any flash mode, exposure, or shooting menu
settings before pressing the n button.
2 Use the multi selector to choose a (smile
timer), and press the k button.
• If the k button is not pressed within a few seconds, the
selection is set and the setting menu disappears.
3
Frame the picture and wait for the subject to
smile without pressing the shutter-release
button.
• When the camera detects a face, a yellow double border
(focus area) is displayed around that face. When the
camera has focused on that face, the double border will
turn green for a moment and focus is locked.
• Up to three faces are detected. When more than one face is detected, the face closest
to the center of the frame is framed by a double border and the others by single
borders.
• If the camera detects that the face framed by the double border is smiling, the shutter
is automatically released.
• Each time the shutter is released, automatic shooting using face detection and smile
detection is repeated.
4 Shooting ends.
• To cancel smile detection and stop shooting, return to step 1 and select OFF.
Smile timer
1/250
1/250
1/250
1342
1342
1342
F5.6
F5.6
F5.6