Nikon P7100 Webcam User Manual


 
E76
The Setup Menu
Reference Section
Self-timer: After Release
Set whether or not to cancel the self-timer mode (A64), or ten seconds or two
seconds remote mode (E105), after shooting pictures.
Vibration Reduction
When using a tripod to stabilize the camera, set vibration reduction to Off.
When On is selected, an icon for this setting is displayed on the monitor (A8).
B Notes on Vibration Reduction
After the power is turned on or the camera enters shooting mode from playback mode, wait until
the display stabilizes before shooting.
Due to the characteristics of the vibration reduction function, images displayed on the monitor
immediately after shooting may appear blurry.
Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
Press the d button M z tab (A13) M Self-timer: after release
Option Description
Exit self-timer mode
(default setting)
Cancel the self-timer mode after shooting pictures.
The setting is not canceled in the quick-response remote or
smile timer mode (A65).
Stay in self-timer mode
Enable shooting continuously without canceling the setting,
after shooting pictures.
The setting applied in shooting modes A (auto), A, B, C,
D, O (low noise night) or u (special effects) is not
cancelled even after the camera is turned off.
Press the d button M z tab (A13) M Vibration reduction
Option Description
g
On
(default setting)
Correct camera shake that commonly occurs when shooting still pictures
or movies at the telephoto zoom position or slow shutter speed.
The camera automatically detects the panning direction and only
corrects for vibration caused by camera shake.
When the camera is panned horizontally, for example, vibration
reduction only reduces vertical shake. If the camera is panned
vertically, vibration reduction only compensates for horizontal shake.
k Off Vibration Reduction is not enabled.