Filter
Top Products
Chapter 3. Using the gateway
shutdown
Bring down the gateway, by setting state to
’shutdown’. After a shutdown is initiated, there is
no other chance to resume normal operation.
However, ’status’ command still works. Password
required. If shutdown is sent for a second time, the
gateway is forced down, even if it has still
messages in queue.
flush-dlr
If Kannel state is ’suspended’ this will flush all
queued DLR messages in the current storage
space. Password required.
start-smsc
Re-start a single SMSC link. Password required.
Additionally the smsc parameter must be given to
identify which smsc-id should be re-started.
stop-smsc
Shutdown a single SMSC link. Password
required. Additionally the smsc parameter must be
given (see above).
24