Filter
Top Products
Chapter 5. Setting up a SMS Gateway
Variable Value Description
connect-allow-ip IP-list
If set, only connections from
these IP addresses are accepted
to receive-port. TCP/IP
connection only.
idle-timeout number (seconds)
If this option is set to a value
larger than 0, then the connection
will be closed after the
configured amount of seconds
without activity. This option
interacts with the keepalive
configuration option. If
keepalive is smaller than
idle-timeout, then the
connection will never be idle and
those this option has no effect. If
keepalive is larger than
idle-timeout, than
keepalive reopens the
connection. This allows one to
poll for pending mobile
originated Short Messages at the
SMSC.
keepalive number (seconds)
A keepalive command will be
sent to the SMSC connection this
many seconds after the last
message. The right value to use
depends on how eager the SMSC
is to close idle connections. 50
seconds is a good guess. If you
see many unexplained
reconnects, try lowering this
value. Set it to 0 to disable this
feature. Requires username or
my-number to be set.
wait-ack number (seconds)
A message is resent if the
acknowledge from SMSC takes
more than this time. Defaults to
60 seconds.
35