Filter
Top Products
20 Commissioning configuration procedures
Prerequisites
•
You have securely mounted the Secure Router 4134 in an equipment
rack.
•
You have connected a local terminal to the console port on the rear
panel of the Secure Router 4134.
•
You have powered up the Secure Router 4134.
•
The boot sequence is complete.
Procedure steps
Step Action
1
To log on to the Secure Router 4134 CLI for the first time, enter the
default user name and password:
login: admin
password: setup
—End—
Defining boot parameters
You can configure boot parameters for the Secure Router 4134. The Secure
Router 4134 provides two bootrom images for redundancy:
•
normal bootrom—the default boot image saved in the normal boot area,
and used as your working bootrom image
• golden bootrom—the backup boot image saved in the golden boot area,
and used if the normal bootrom image is corrupted
Procedure steps
Step Action
1
To access configuration mode, enter:
configure terminal
2
To define the boot parameters, enter:
boot_params
—End—
Nortel Secure Router 4134
Commissioning
NN47263-302 01.02 Standard
10.0 2 August 2007
Copyright © 2007, Nortel Networks
.