Filter
Top Products
34 Commissioning configuration procedures
Adding users
You can identify users (that is, login names) who can access the Secure
Router 4134, and assign each user an access privilege (levels 2–4). Only
the system administrator (level 1 access) can add, modify, or remove this
information from the system.
Procedure steps
Step Action
1
To access configuration mode, enter:
configure terminal
2
Enter the user name and access level:
user <username> level <value>
The Secure Router 4134 prompts you to enter a password for this
user.
3
Enter a password (from 0 to 10 characters) for the new user.
The Secure Router 4134 prompts you to re-enter the password.
4
Re-enter the password for the new user.
The Secure Router 4134 confirms that the password is set and
confirms the name of the new user is added.
—End—
Table 11
Variable definitions
Variable Value
<username>
The user name you want to add to the Secure
Router 4134. The user name can contain up
to 39 characters.
<value> The access level assigned to the user. Values
are 2–4. The lower the access level value, the
higher the access privileges. For example,
a user with an access level of 2 has more
privileges than a user with an access level 3
or 4.
Nortel Secure Router 4134
Commissioning
NN47263-302 01.02 Standard
10.0 2 August 2007
Copyright © 2007, Nortel Networks
.