Filter
Top Products
26 Commissioning configuration procedures
Procedure steps
Step Action
1
To start a Telnet session from your workstation, enter:
telnet <ipaddr>
2
To log in, enter:
login: admin
password: setup
—End—
Viewing Telnet server settings
View the Telnet server settings for information about the status of the Telnet
server (enabled or disabled) and the Telnet session timeout value.
Procedure steps
Step Action
1
To view information about the Telnet server settings, enter:
show telnet
—End—
Clearing a Telnet session
You can disconnect a specific Telnet session, if necessary, or you can
disconnect all Telnet sessions simultaneously.
Procedure steps
Step Action
1
To view the list of users currently connected using a Telnet session
to find the Telnet session sequence numbers, enter:
show users
The following figure shows an example of the Telnet session
sequence numbers for users remotely connected to the router.
Nortel Secure Router 4134
Commissioning
NN47263-302 01.02 Standard
10.0 2 August 2007
Copyright © 2007, Nortel Networks
.