Filter
Top Products
Chapter 3 Upgrading to BCM 4.0 and SRG 1.5 21
Upgrade Guide
To perform the BCM 4.0 and SRG 1.5 upgrade
1 Insert the BCM 4.0 Upgrade CD marked Disk 1 into the CD-ROM drive of the management
computer.
• If your CD-ROM drive is configured to run automatically, the welcome page appears.
• If your CD-ROM drive does not run automatically, run Startup.bat.
(On Windows, click Start, choose Run, enter <CD drive letter>:Startup.bat and then
click OK.)
The welcome page of the Upgrade Wizard appears (see Figure 2). Read the information
carefully so that you understand the upgrade process. This page explains how the upgrade
process works.
Figure 2 BCM Upgrade Wizard welcome page
2 Click I Accept to proceed with the upgrade.
The BCM Upgrade Checklist page appears (see Figure 3).