Filter
Top Products
Chapter 3 Upgrading to BCM 4.0 and SRG 1.5 23
Upgrade Guide
Figure 4 BCM Upgrade Wizard sign-in page
5 Enter the IP address of the system being upgraded in the IP Address box.
The IP address format is xxx.xxx.xxx.xxx; press the space bar to move between fields.
6 In the Password box, enter PlsChgMe! as the password. The username is entered
automatically as ee_admin.
7 Click Browse for keycode file to select the keycode file to install on the BCM system. You
cannot proceed with the upgrade without the correct keycode.
The BCM 4.0 Upgrade keycode is required to upgrade to BCM 4.0, and the SRG 1.5 Upgrade
keycode is required to upgrade to SRG 1.5.
If you are uncertain about how to obtain a keycode, click the How do I get a Keycode? button
or refer to the Keycode Installation Guide.
Note: You must use PlsChgMe! for the password or the upgrade will not proceed.