Filter
Top Products
Menu functions - C821 and C830 > 58
Print Setup
(cont.)
Mono-Print
Speed
Auto
Mono 32ppm
Color Speed
Mixed Speed
If the first page of a print job is black and white, the
printer runs at 32ppm (pages per minute). When a colour
page is detected the printer slows down to 30ppm (C830)
or 26ppm (C821) for the rest of that job.
This setting operates in the same way as AUTO SPEED,
except that the printer runs at 32ppm until a colour page
is detected. To achieve this speed the printer requires an
additional time to warm up and cool down when switching
to 30ppm (C830) or 26ppm (C821) for colour pages. This
setting is therefore most appropriate when the majority of
print jobs are entirely black and white.
The printer runs at 30ppm (C830) or 26ppm (C821) for all
print jobs. This setting is most appropriate when the
majority of print jobs are in colour.
The printer runs at 26 ppm (C830) or 22ppm (C821) for
colour pages and 30 ppm (C830) or 26ppm (C821) for
mono pages.
Default
Orientation
Portrait
Landscape
Specifies print orientation.
Not valid for PS (valid only for PCL/ IBMPPR/EPSONFX/
HP-GL2).
Form Length 5 lines
~
64 lines
~
128 lines
Sets the number of lines that can be printed on a page
Not valid for PS (valid only for PCL/HP-GL2).
Default values listed to the left are for Letter/A4. In
practice, however, they change according to the size of
paper loaded in the tray.
Edit Size Cassette Size/
A3/A4 Short
Edge/A4 Long
Edge/A5/A6/B4/
B5 Short Edge/
B5 Long Edge/
Legal14/
Legal13.5/
Legal13/Tabloid/
Letter Short
Edge/Letter
Long Edge/
Executive/
Custom/Com-10
Envelope/DL
Envelope/C5/C4
Sets the size of an area to draw when the host PC does
not specify the size via the paper edit size designating
command (Not valid for PS - only for PCL).
X Dimension 64 mm
~
210 mm
~
297 mm
Specifies paper width of Custom paper as a default value.
Sets a paper size at right angles to the paper run
direction.
Y Dimension 105 mm
~
297 mm
~
1321 mm
Specifies paper length of Custom paper as a default value.
Sets a paper size in the same direction as the paper run
direction.
ITEM SETTINGS EXPLANATION