Menu functions - C821 and C830 > 60
PCL Setup
(cont.)
True
Black
On/Off Sets whether to use Composite Black (cmyk mixed) or
Pure Black (K only) for the black (100%) in image data.
OFF: Mode using Composite Black
ON: Mode using Pure Black
(PCL only)
Pen Width
Adjust
On/Off When minimum width is specified in PCL, sometimes a 1-
dot line, looks broken.
With PEN WIDTH Adjust set to ON, when the minimum
width is specified, the line width will be emphasized so as
to look wider than a 1-dot line.
With PEN WIDTH Adjust set to OFF, the line will appear as
before.
Tray 2 ID# 1 ~ 5 ~ 59 Sets the # to specify Tray 2 for the paper feed destination
command (ESC&l#H) in PCL5e emulation.
(Displayed only if Tray 2 is installed).
Tray 3 ID# 1 ~ 20 ~ 59 Sets the # to specify Tray 3 for the paper feed destination
command (ESC&l#H) in PCL5e emulation.
(Displayed only if Tray 3 is installed).
MPTray ID# 1 ~ 4 ~ 59 Sets the # to specify the MP tray for the paper feed
destination command (ESC&l#H) in PCL5e emulation.
IBM PPR
Setup
Character
Pitch
10 CPI
12 CPI
17 CPI
20 CPI
Proportional
Specifies character pitch in IBM PPR emulation.
Font
Condense
12CPI to
20CPI
12CPI to 12CPI
Specifies 12CPI pitch for Condense Mode.
Character
Set
SET-2
SET-1
Sets a character set.
Symbol
Set
IBM-437 Sets the Symbol Set for IBM PPR (see machine operator
panel for complete list).
Letter O
Style
Enable/Disable Specifies the style that replaces ø (9B) and ¥ (9D) with ø
(ou) and Ø (zero).
Zero
Character
Normal/Slashed Specifies the style of 0(zero). SLASHED: SLASH ZERO
Line Pitch 6/8 LPI Sets line space.
White
Page Skip
On/Off Sets whether to eject a blank sheet. Available only when
simplex is set.
CR Function CR/CR+LF Sets action when CR code is received.
LF Function LF/LF+CR Sets action when LF code is received.
Line Length 80/136 column Specifies the number of characters per line.
Form Length 11/11.7/12 inch Specifies the length of paper.
TOF Position 0.0/0.1/~1.0
inch
Sets the position from the top edge of paper.
Left Margin 0.0/0.1/~1.0
inch
Sets the amount to shift the horizontal print start position
to the right.
ITEM SETTINGS EXPLANATION
