Filter
Top Products
Menu functions - C830 > 42
A
DMIN
S
ETUP
ITEM SETTINGS EXPLANATION
Enter
Password
xxxxxxxxxxxx Enter a password to gain entry to the Admin Setup menu.
Password should be from 6 to 12 digits of alpha/numeric
characters (or mix)
The default value is "aaaaaa"
Network
Setup
TCP/IP Enable
Disable
Sets TCP/IP Protocol.
Enable: TCP/IP Protocol is available.
Disable: TCP/IP Protocol is not available.
IP Version IP v4
IP v4+v6
Set up the IP version.
Operates with IPv4 for IPv4 (not valid with IPv6).
Operates with both IPv4 and IPv6
NetBEUI Enable
Disable
Sets Enable/Disable of NETBEUI Protocol.
NetWare Enable
Disable
Sets Enable/Disable of NetWare Protocol.
EtherTalk Enable
Disable
Sets Enable/Disable of EtherTalk Protocol.
Frame Type Auto
802.2
802.3
Ethernet II
SNAP
Sets the frame type.
Netware should be enabled.
TypeIP
Address Set
Auto
Manual
Sets the IP Address setting method.
TCP/IP should be enabled.
IP Address xxx.xxx.xxx.xxx Sets the IP Address.
TCP/IP should be enabled.
Subnet Mask xxx.xxx.xxx.xxx Sets the Subnet Mask.
TCP/IP should be enabled.
Gateway
Address
xxx.xxx.xxx.xxx Sets the Gateway (default router) address.
0.0.0.0 means that there is no router.
TCP/IP should be enabled.
Web Enable
Disable
Sets Enable/Disable of Web.
Enable: Web/IPP is available.
Disable: Web/IPP is not available.
TCP/IP should be enabled.
Telnet Enable
Disable
Sets Enable/Disable of Telnet.
Enable: Telnet is available.
Disable: Telnet is not available.
TCP/IP should be enabled.
FTP Enable
Disable
Sets Enable/Disable of FTP.
Enable: FTP is available.
Disable: FTP is not available.
TCP/IP should be enabled.