Filter
Top Products
Menu functions - C830 > 56
Storage Setup
Power Setup
Language Setup
P
RINT
S
TATISTICS
M
ENU
This menu is only accessible to System Administrators. In order to gain access to this
menu, follow the instructions in “How to change the settings - Administrator” on page 34,
but hold down the Menu button instead of the Enter button.
This menu is in ENGLISH only (default settings in bold type).
ITEM SETTINGS EXPLANATION
Enable initialisation Yes/No
ITEM SETTINGS EXPLANATION
Peak Power Control Normal/low
Power Save Enable
Disable
Sets Enable/Disable of Power Save Mode.
USB Host Power Off/On
ITEM SETTINGS EXPLANATION
Language initialize Execute Initialises the message file loaded in FLASH.
When you press the Enter button, the following
message, requesting confirmation, will appear,
Are You Sure?
Yes
No
If NO is selected, you will be returned to the source
menu.
The procedure for clearing the disk will start immediately
after the menu and rebooting.
ITEM SETTINGS EXPLANATION
Enter Password XXXX Enters a password to enter Print Statistics menu.
The default value is "0000".
The password for entry to Print Statistics is different
from the password for entry to Functions-Admin Setup.
"Print Statistics" category is not shown when Print
Statistics function is not supported.
Usage Report Enable/Disable Enables/Disables the printing of the Usage Report.
When changing a setting value, the printer is rebooted.
Group Counter Enable/Disable Specifies if the Group counter is displayed in the Usage
Report Print.
Enable: Displayed,
Disable: Not displayed.
Conditions for display:
Enable must be selected in Functions/Print Statistics/
Usage Report.