Filter
Top Products
Menu functions - C830 > 44
Print Setup
(cont.)
Mono-Print
Speed
Auto
Mono 32ppm
Color Speed
Mixed Speed
Sets the monochrome print speed. Prints at the most
appropriate speed for page process if Auto is set.
Prints always at the color print speed if Color is set.
Prints always at the monochrome print speed if Normal is
set.
Prints always at 26ppm of the gradation print speed for
both color and monochrome print if High Quality is set.
Default
Orientation
Portrait
Landscape
Specifies print orientation.
Not valid for PS (valid only for PCL/ IBMPPR/EPSONFX/
HP-GL2).
Form Length 5 lines
~
64 lines
~
128 lines
Sets the number of lines that can be printed on a page
Not valid for PS (valid only for PCL/HP-GL2).
Default values listed to the left are for Letter/A4. In
practice, however, they change according to the size of
paper loaded in the tray.
Edit Size Cassette Size/
A3/A4 Short
Edge/A4 Long
Edge/A5/A6/B4/
B5 Short Edge/
B5 Longt Edge/
Legal14/
Legal13.5/
Legal13/Tabloid/
Letter Short
Edge/Letter
Long Edge/
Executive/
Custom/Com-10
Envelope/DL
Envelope/C5/C4/
Sets the size of an area to draw when the host PC does
not specify the size via the paper edit size designating
command (Not valid for PS - only for PCL).
X Dimension 64 mm
~
210 mm
~
297 mm
Specifies paper width of Custom paper as a default value.
Sets a paper size at right angles to the paper run
direction.
Y Dimension 105 mm
~
297 mm
~
1321 mm
Specifies paper length of Custom paper as a default value.
Sets a paper size in the same direction as the paper run
direction.
PS Setup Network
Protocol
ASCII/RAW Specifies PS communication protocol mode of data from
NIC port.
(In RAW mode, Ctrl-T is invalid). PS models only.
Parallel
Protocol
ASCII/RAW Specifies PS communication protocol mode of data from
Centronics port.
(In RAW mode, Ctrl-T is invalid). PS models only.
USB
Protocol
ASCII/RAW Specifies PS communication protocol mode of data from
USB port.
(In RAW mode, Ctrl-T is invalid). PS models only.
ITEM SETTINGS EXPLANATION