Filter
Top Products
USER INTERFACE > 42
PRINTING VIA THE SCANCOPIER
The following illustration shows all cable connections, although you
may not use all of them depending on how you use the Scancopier.
1.
Printer cable (to parallel data port on printer).
2.
Parallel cable (to PC parallel port) allows you to print from your
PC if required.
3.
USB cable (to PC USB port) for scanning images into your PC.
4.
ADF cable (if you have an ADF).
5.
Power cable (to AC power outlet).
Printing from your PC is carried out via cables (2) and (1). Data passes
from your PC through the Scancopier, unchanged, to the printer. It is
not possible to use the USB cable (3) for printing. This cable is used
only for scanning images into the PC.
CAUTION!
Attempting to scan and print at the same time will produce
unpredictable results as a mixture of print and scanned image data will
be sent to the printer at the same time.
1
2
3
54